|
Key Specifications
|
|
|
| Frequency |
L1, 1575.42 Mhz |
|
| C/A Code |
1.023 Mhz chip rate |
|
| Channels |
20 Channel all-in-view tracking |
|
| Position Accuracy |
10 meters 2D RMS; 1-5 meters 2D RMS; WAAS corrected |
|
| Velocity Accuracy |
0.1 m/sec |
|
| Time Accuracy |
1 micro-second synchronized to GPS time |
|
|
|
| Reacquisition Time |
0.1 sec., average |
|
| Hot Start Time |
1 sec., average |
|
| Warm Start Time |
38 sec., average |
|
| Cold Start Time |
42 sec., average |
|
| Altitude Limit |
18,000 meters (60,000 feet) max |
|
| Velocity Limit |
515 meters/second (1000 knots) max |
|
| Acceleration Limit |
Less 4g |
|
|
|
| DC Supplies |
4.5V - 5.5V / 0.5A |
|
| Battery Cell Type |
Lithium-ion Rechargeable Battery |
|
| GPS Protocol |
Default: NMEA 0183 (Secondary: SiRF Binary) |
|
| GPS Output Format |
GGA(1sec), GSA(1sec), GSV(5sec), RMC(1sec), GLL, VTG is optional |
|
| Dimension |
93.0 mm x 41.0 mm x 13.4 mm |
|
|
|
Special Features
|
| This GPS receiver contains the lastest SiRF Star III Low Power Chipset for high sensitivity and it also supports WAAS and EHNOS for even greter accuracy. |
|
| It communicates with Host Platforms (PDA, Laptop, and etc.) via Bluetooth Serial Port Profile. With Bluetooth 2.0 and built-in ceramic patch antenna, it can provide faster accquisition times and improve accuracy in urban canyons and under dense foliage. The Bluetooth Chipset is CSR BC4, operaion range is 10 meters (33 feet), frequency is 2402MHz-2480Mhz, output power 0 dbm (classII), default PIN is 0000. |
|
| The GPS Receiver contains a replaceable battery with a large capacity, which enables it to operate for up to 11 hours. A slide battery lid makes it easy to remove and replace the battery without the use of tools. The charge connector is Mini USB. The charge time is 4-5 hours. It can automatically enters Turn-Off when there is no active Bluetooth connection 10 minutes |
|
| Off to ON: Press the ON-OFF button for approximately 1s causes the unit to turn ON; ON to turn OFF: Press the ON-OFF button for approximately 1s causes the unit to turn OFF; Reset: Press the ON-OFF button for approximately 5s causes the unit to reset. |
|
| GPS status Blinking: GPS position is fixed; GPS status Solid Red: GPS position is not fixed; Power status Solid Red: Battery Low; Power status Solid Amber: Battery is charging; Bluetooth status Blinking (Slowly): Not connected to any Bluetooth devices. |
|
|